|
|
|
|
|
|
Brief：
Cosmetic Making Machine
| The materials are heated and mixed in water pot and oil pot to be fully reacted. Sucked into emulsifying pot by vacuum pump, the materials are stirred by both the center blade and side scraper, which works on the wall. In the process of blade-stirring, the materials are continuously crushed, pressed, folded. Then,the materials are sent to the cut-off mixing until where they are finally crushed into small pellets of 200μm~2μm. Besides,because of the vacuum in emulsifying pot,the bubbles generated during stirring and mixing process are sucked out from material. http://www.fill-nuoya.com/ | 。 |
|
|
|
