Huanya Chemical, Diallyl Phthalate (DAP) Monomer supplier in China ☏ 13176033723
Find Diallyl Phthalate Monomer factory manufacturer supplier in China
Do you know how many Diallyl Phthalate (DAP) Monomer Manufacturer in China?
Shandong Huanya Chemical Company is the one and only diallyl phthalate monomer manufacturer in China.
How many Diallyl Phthalate (DAP) Monomer Supplier in China?
Originally, all the diallyl phthalate sold with high price in China are imported from around countries, until in the year 2010, we import the diallyl phthalate production line. And the diallyl phthalate DAP price reduced suddenlly to reasonable level.
As diallyl phthalate DAP monomer factory, we could always provide you high quality product with lower price.
Let us know more attribute of Diallyl Phthalate with below information.
Dially Phthalate Composition, Information on Ingredients
---------------------------------------
CAS#: 131-17-9
Chemical Name: Diallyl phthalate
%: 98
EINECS#: 205-016-3
---------------------------------------
Hazard Symbols: XN
Risk Phrases: 22
Diallyl Phthalate Hazards Identification
EMERGENCY OVERVIEW
Caution! Lachrymator (substance which increases the flow of tears). May be harmful if swallowed. May cause eye and skin irritation. May cause respiratory and digestive tract irritation. Target Organs: None.
Potential Health Effects
Eye: May cause eye irritation. Lachrymator (substance which increases the flow of tears).
Skin: May cause skin irritation.
Ingestion: May cause digestive tract disturbances. May be harmful if swallowed.
Inhalation: May cause respiratory tract irritation.
Chronic: No information found.
Diallyl Phthalate First Aid Measures
Flush eyes with plenty of water for at least 15 minutes, occasionally lifting the upper and lower eyelids. Get medical aid immediately. Flush skin with plenty of water for at least 15 minutes while removing contaminated clothing and shoes. Wash clothing before reuse.
If victim is conscious and alert, give 2-4 cupfuls of milk or water. Never give anything by mouth to an unconscious person. Get medical aid immediately.
Get medical aid immediately. Remove from exposure and move to fresh air immediately. If not breathing, give artificial respiration. If breathing is difficult, give oxygen.
Diallyl Phthalate Fire Fighting Measures
As in any fire, wear a self-contained breathing apparatus in pressure-demand, MSHA/NIOSH (approved or equivalent), and full protective gear. During a fire, irritating and highly toxic gases may be generated by General thermal decomposition or combustion. Use water spray to keep fire-exposed containers cool. Containers.
Information:
may explode in the heat of a fire. Vapors may be heavier than air. They can spread along the ground and collect in low or confined areas.
Extinguishing Water spray may cause frothing. Use agent most appropriate to extinguish fire. Use water spray, dry
Media: chemical, carbon dioxide, or appropriate foam.
Autoignition
Not available
Temperature:
Flash Point: 166 deg C ( 330.80 deg F)
Explosion
N/A
Limits: Lower:
Explosion
N/A
Limits: Upper:
NFPA Rating: 1 - health, 1 - flammability, 1 - instability
Diallyl Phthalate Accidental Release Measures
General
Use proper personal protective equipment as indicated in Section 8.
Information:
Clean up spills immediately, observing precautions in the Protective Equipment section. Provide
Spills/Leaks:
ventilation.
Diallyl Phthalate Handling and Storage
Wash thoroughly after handling. Remove contaminated clothing and wash before reuse. Avoid contact with eyes, skin, and clothing. Avoid ingestion and inhalation.
Keep container closed when not in use. Store in a cool, dry, well-ventilated area away from incompatible substances.
Diallyl Phthalate Exposure Controls, Personal Protection
OSHA Vacated PELs: Diallyl phthalate: None listed Engineering Controls:
Use process enclosure, local exhaust ventilation, or other engineering controls to control airborne levels.
Exposure Limits
Personal Protective Equipment
Wear appropriate protective eyeglasses or chemical safety goggles as described by OSHA's eye and face
Eyes:
protection regulations in 29 CFR 1910.133 or European Standard EN166.
Skin: Wear appropriate protective gloves to prevent skin exposure.
Clothing: Wear appropriate protective clothing to minimize contact with skin.
A respiratory protection program that meets OSHA's 29 CFR 1910.134 and ANSI Z88.2 requirements or
Respirators:
European Standard EN 149 must be followed whenever workplace conditions warrant respirator use.
Diallyl Phthalate Physical and Chemical Properties
Physical State: Liquid
Color: almost colorless
Odor: mild odor
pH: Not available
Vapor Pressure: 2.4 mm Hg @ 150C
Vapor Density: 8.3
Evaporation Rate: Not available
Viscosity: 13cP @ 20.00 deg C
Boiling Point: 165.0 - 167.0 deg C @ 5.00MM
Freezing/Melting Point: 0 deg C ( 32.00F)
Decomposition Temperature: Not available
Solubility in water: Slightly soluble
Specific Gravity/Density: 1.1200g/cm3
Molecular Formula: C14H14O4
Molecular Weight: 246.26
Diallyl Phthalate Stability and Reactivity
Chemical Stability: Stable under normal temperatures and pressures.
Conditions to Avoid: Incompatible materials, strong oxidants.
Incompatibilities with Other Materials Not available
Hazardous Decomposition Products Carbon monoxide, carbon monoxide, carbon dioxide.
Hazardous Polymerization May occur.
Diallyl Phthalate Toxicological Information
RTECS#: CAS# 131-17-9: CZ4200000
RTECS:
CAS# 131-17-9: Draize test, rabbit, eye: 500 mg Mild;
Draize test, rabbit, skin: 500 mg Moderate;
Inhalation, rat: LC50 = 5200 mg/m3/1H;
LD50/LC50:
Oral, rabbit: LD50 = 1700 mg/kg;
Oral, rat: LD50 = 656 mg/kg;
Skin, rabbit: LD50 = 3300 mg/kg;
.
Carcinogenicity: Diallyl phthalate - Not listed as a carcinogen by ACGIH, IARC, NTP, or CA Prop 65.
Other: See actual entry in RTECS for complete information.
Diallyl Phthalate Ecological Information
DAP Disposal Considerations
Dispose of in a manner consistent with federal, state, and local regulations.
DAP Transport Information
US DOT
Shipping Name: Please contact Fisher Scientific for shipping information
Hazard Class:
UN Number:
Packing Group:
Canada TDG
Shipping Name: Not available
Hazard Class:
UN Number:
Packing Group:
DAP Regulatory Information
Diallyl Phthalate European/International Regulations
European Labeling in Accordance with EC Directives
Hazard Symbols: XN
Risk Phrases:
R 22 Harmful if swallowed.
Safety Phrases:
S 24/25 Avoid contact with skin and eyes.
WGK (Water Danger/Protection)
CAS# 131-17-9: 2
Canada
CAS# 131-17-9 is listed on Canada's DSL List
Canadian WHMIS Classifications: D2B
This product has been classified in accordance with the hazard criteria of the Controlled Products Regulations and the MSDS contains all of the information required by those regulations.
CAS# 131-17-9 is not listed on Canada's Ingredient Disclosure List.
US Federal
TSCA
CAS# 131-17-9 is listed on the TSCA
Inventory.
MSDS Creation Date: 2/09/1998
Revision #5 Date 7/20/2009
The information above is believed to be accurate and represents the best information currently available to us. However, we make no warranty of merchantibility or any other warranty, express or implied, with respect to such information, and we assume no liability resulting from its use. Users should make their own investigations to determine the suitability of the information for their particular purposes. In no event shall the company be liable for any claims, losses, or damages of any third party or for lost profits or any special, indirect, incidental, consequential, or exemplary damages howsoever arising, even if the company has been advised of the possibility of such damages.
☼→Huanya Chemical, the one and only Diallyl Phthalate Monomer factory, manufacturer, and supplier in China! Buy DAP monomer, contact Huanya Chemical!
