side-mounted rear unloading (compressed) garbage truck notes

side-mounted rear unloading (compressed) garbage truck notes:

1 garbage truck input is strictly prohibited, and the series of construction waste, so as not to damage the parts. 

2, hydraulic system operation if the movement abnormalities are found, should immediately stop work, analyze the causes, and troubleshooting. do not strongly pressured job. 

3, whether it is snapping and disengage PTO, you must tap the clutch pedal;, PTO and valves in State, the waste shall enter the running state. 

4, hydraulic system pressure regulating device for valves on the pressure bolt, the bolt by the school after the pressure setting and locking, shall not the Italian mobilization. users are not allowed to just adjust the oil pressure. 

5, vehicles collecting trash when the job is complete, you should reduce the lift came to an end. 

6, car-washing water must not be rushed into the hydraulic tank. always check the hydraulic oil level, when there is insufficient hydraulic oil should be promptly added Note, all joints shall not leak oil. 

7, overhaul should prevent collisions, prevent parts damage, distortion and scratches, etc. the Assembly parts that must be made when clean.

information is from: http://www.szclwtq.com/jishuziliao/1900.html

official website: http://www.szclwtq.com/