State IV arm garbage truck, 4-10 side swing arm garbage truck

swing arm Garbage cars with Dongfeng, Jiefang chassis and wear uniform matching hydraulic lifting Assembly, through both right and left arms shipment national swing arm garbage bucket, bucket, dump capability, achieve security and stability, reliable performance. the trash bucket car body divided into arm and dual-configuration of different forms of garbage on the ground. may incorporate a seal to prevent leaking dust pollution, to adapt to different environments require the use of leading technologies and accessories for military enterprise, reliable quality, the drawings can be used by manufacturers to provide users with spam bucket, assist users in designing junk. swing arm garbage truck -pit garbage vehicles, floor swing arm swinging arm garbage truck, xiaobian this picture down below the 4 swing arm garbage truck have?

8-10 Dongfeng 153 1, four arm garbage truck, vehicle model: CLW5160ZBST4-swing arm garbage truck, chassis model: EQ1168VFJ1, wheelbase: 3800,3950,4200,4500,4700,5100, on tonnage: 9.06 Mt, 8.61 tons, swing arm bucket volume: cubic 8-10;

Furui card arm 2, four Dongfeng garbage truck, vehicle model: CLW5070ZBSD4-swing arm garbage truck, chassis model: DFA1070SJ35D6, wheelbase: 3300mm households on tonnage: 3.07 tons, 3.005 tons, swing arm bucket capacity: 4 cubic meters;

above swing arm garbage truck Performance characteristics and instructions:

  swing arm garbage truck arm body: swing arm mechanism is composed of steel structures, whose main function is controlled by multi-way valve cylinder driving swing arm spools on rotation, rotation angle of 145 °, thereby improving the hopper, and hopper a tilting motion. swing arm garbage truck Hopper: hopper is welded metal parts, have opened and sealed the two form. when bulk cargo after loading hopper, hanging hanging chain, by manipulating the arm will lift the hopper car. the discharge operation swing arm when the hopper lift, remove the ground at one end of the chain is operational hopper discharge. hopper the biggest tipping point of up to 86 degrees.   hydraulic operating system: composed of tanks, pumps, valves, hydraulic cylinders, valves, hydraulic locks, the oil filter and piping and other components. the entire system powered by the auto transmission, PTO, manual valves control Outrigger cylinders, swing arm cylinder for telescopic movement. this system was pump-engine size is made statements manual throttle control, manual valve lever control valve lever stroke speed control cylinder piston rod motion, the system pressure can be set by the safety relief valve, the system exceeds the set pressure safety relief valve will be overflowing.  :  through the system realizes the functions of conversion of the operating system. operating valves should be hung before, PTO-driven oil pump. by manipulating valves handles complete leg stretching and loading, unloading. by manipulating the valves next to the throttle grip to control engine speed, to regulate the flow of the system change agency operating speeds.

information is from: http://www.szclwtq.com/xingwen/1882.html

official website: http://www.szclwtq.com/